HG-HJ series glass sheet combiner - Glass laminating equipment

product details

Position： Home > Glass laminating equipment

HG-HJ series glass sheet combiner

Product brief introduction：

Detail
Technical feature

HG-HJ series glass sheet combiner is especially manufacturing the arc laminated glass. It was be consisted of 2 sets glass loader, glass conveyer, electric control system, pneumatic and vacuum system.

Working process:

When the bent didymous glass transported on the conveying rolls in the cleaning powder section touches the pressure switch, the position cylinder will raise the glass automatically. The loader with the vacuum cupules lifts the upper glass. The operator cleans the silicate powder by cleaner, then control the loader put the glass back, the clean glass will be transported to the combing position. When the glass arrives the right position and waiting for the combing cylinder rising automatically, the loader lift the upper glass, the cupules suck another piece of glass. After the operator cleaning the glass, placing the film, the loader puts the upper glass back and left the glass. The glass will be transported to the rubber-covered position, the position cylinder will raise the glass, the operator trims the film and fix the rubber ring, the combing is finished.

Main technology character:

Under controlled by PLC automatically in the full line.
The loader adjusts the speed by the frequency inverter, which is reliable and stable.
High efficiency, without the conveying by the operator, reducing the cullet rate the operator’s working intensity. The control program was be developed by us, which is reliable and stable.

HG-HJ1610 technology specification:

Out size of the equipment:

7800x 2800mm (the length can be design according the yield)

Power: 8.5 KW

MAX Size of the glass: 1600×1000mm

Capability: 260-350 pairs/8 h

Remark: we can provide more specification according to customer's requirement.